







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Tustin Homeowners
Fence work in Tustin usually starts with a complaint you can’t ignore anymore: a gate that drags, a row of posts leaning after a wet winter, boards that have gone gray and brittle. The bigger issue is that fencing sits at the edge of your property, on a line that has to be accurate and posts that have to be set right, and a bad install shows up fast. Our technicians have up to 15 years of experience and our material options run through named manufacturer lines, so you know what the fence will actually be built from. Whether you’re replacing a wood run or starting fresh with vinyl, call (844) 415-6046 and we’ll get an estimate on the calendar.
What Our Fence Installation Service Includes
Fencing covers a lot of ground under one word. A chain link enclosure around a side yard and a decorative iron run along a front walk are different jobs with different materials, anchors and post spacing. Here’s what each type actually involves and when it’s the right call.
Wood Fence
Wood fencing is the most common choice in Tustin’s older residential blocks, where lot lines are tight and a dog-eared or board-on-board run matches the neighbors. You need wood when you want privacy at a lower entry price and don’t mind periodic staining. We set posts in concrete at the depth the soil and fence height call for, then build the run with consistent spacing and a top cap where the design suits it. Wood gives you the most freedom to match existing runs and repair sections rather than replace the whole line.

Chain Link Fence
Chain link is the practical answer for side yards, pet enclosures, and anything that needs to keep boundaries clear without blocking light. It’s the budget-friendly option for larger perimeters, and it holds up better than wood where a fence takes constant sun and dry soil. We install both galvanized and vinyl-coated chain link with proper tension so the fabric doesn’t sag between posts over the years. If you’re fencing a long back line, this is usually the material we recommend first.

Vinyl Fence
Vinyl fencing has become the low-maintenance standard for Tustin homeowners who don’t want to repaint every few years. You get the privacy of wood without the staining, and the material handles Southern California sun well. We work with proven vinyl lines so the panels are backed by a manufacturer warranty rather than a substitution. Vinyl is the right call when you want a clean, uniform look that stays put, and most Tustin vinyl runs land in the $3500 – $9000 range depending on length, gate count, and profile.

Aluminum Fence
Aluminum fencing is what most homeowners mean when they want a decorative look without iron maintenance. It won’t rust the way iron can, it’s lighter, and it holds a finish longer in dry heat. It suits front-yard boundaries, pool surrounds, and anything where you want to see through the fence. We install aluminum in the $4000 – $10000 range for typical Tustin properties, with style and post options that depend on the line you choose. Powder-coated aluminum is a strong middle ground when you want the iron look without the upkeep.
Iron Fence
Iron fencing is heavier and more substantial than aluminum, and it’s usually chosen for curb appeal and long-term durability rather than quick installation. It suits heritage properties, front elevations, and any home where the fence is part of the design rather than just a boundary. We install iron with anchors set properly for the weight and take time with the spacing and level lines so the run looks clean from the street. Iron needs occasional touch-up on the finish, but it will outlast most other fence materials.
Fence Repair
Not every fence needs replacing. Leaning posts, popped boards, sagging gates, and storm damage are often fixable at a fraction of the cost of a new install. We inspect the whole run before recommending anything and tell you plainly whether repair is worth it or whether you’re throwing money at a fence that’s already past its useful life. If a section is bad, we repair the section. If the whole line is failing, we quote a replacement with materials you can compare side by side.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
The difference between a fence that lasts twenty years and one that looks tired in five usually comes down to the material line. We work with Barrette because their vinyl and composite fence systems are well supported and hold up to sun, and we know which of their profiles suit tighter residential lots. Jerith gives us aluminum and iron quality that resists sagging and finish failure, especially in gate assemblies where the hinge weight gets abused daily.
ActiveYards and Bufftech round out the vinyl and composite side, and both build with proprietary materials that hold color far longer than generic panels. Every one of these is a brand we’ve installed and can stand behind, so you’re getting a manufacturer-backed product, not a substitution. Whether you have Bufftech in mind, want to see ActiveYards options, or you’re leaning toward Jerith aluminum, we can walk you through what each one actually means for your project. Call (844) 415-6046 to talk through options.
Signs You Need Fence Installation Right Now
Fencing problems rarely resolve themselves. Here’s what to look for before a small issue turns into a full replacement.
- Posts leaning or pulling from the ground. A leaning post means the footing has failed, usually from soil movement or rot at the base. Left alone, the whole run will start to shift with it, and the fix gets more expensive the longer you wait.
- Boards rotting, warping, or loosening. Once boards begin to rot at the bottom, the fence is deteriorating along its whole length. Replacing a section is reasonable, but if a third of the run is affected, replacing the fence is usually the better value.
- Gates that drag, sag, or won’t latch. A sagging gate is often a hinge or post problem, not a gate problem. It matters because a gate that doesn’t close properly is the first thing that fails after a storm.
- Visible storm or wind damage. Fences take the brunt of Southern California wind events. Loose panels and split boards should be assessed quickly so a single bad section doesn’t take the corners down with it.
- You’re changing the use of the yard. Adding a pet, a pool, or an ADU changes what the fence needs to do. A pet run needs tighter spacing, and a pool usually calls for code-compliant fencing; check your city on the specific requirements before you plan.
Our Fence Installation Process – Step by Step
- 1
Free on-site estimate. We walk the property, measure the actual run, look at what’s there now, and ask about gates, pets, and future plans. You get a written line-item quote with materials named, so you can compare options directly.
- 2
Material and style selection. You choose the material, profile, and finish. We’ll tell you what each option means for durability, upkeep, and cost, and we don’t upsell a vinyl run if a well-built wood fence suits the property.
- 3
Permits and property-line verification. Many cities require a permit for fencing above a certain height, and some HOA and setback rules apply to front yards. We confirm the plan requirements and check the property-line stake before we dig a single post hole.
- 4
Removal and preparation. If there’s an old fence, we take it down and haul it off, then set the post holes at the right depth for the fence height and soil. Post spacing gets marked and checked so the run comes out uniform.
- 5
Install and final walkthrough. Posts get set, panels or fabric go on, gates get hung and adjusted until they swing clean. We walk the finished fence with you so you can check every gate and every run before we call the job done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Tustin?

A typical vinyl fence installation in Tustin runs $3,500 – $9,000, and a typical aluminum fence installation runs $4,000 – $10,000. Those ranges cover most residential runs, with the final number set by the written estimate after we measure. Chain link and wood usually come in lower than vinyl on a per-foot basis, while iron and decorative aluminum sit at the top.
What moves the price:
- Linear footage and corner count. More corners mean more posts, more bracing, and more time.
- Gates. Every gate adds hardware, a heavier post, and hinge work that has to be right.
- Terrain and removal. A slope needs stepped panels; an old fence needs demolition and haul-off.
- Material line and finish. A proven vinyl line and a generic panel aren’t the same price, and they’re not the same fence ten years out.
How to avoid overpaying: get the quote line by line, confirm the material brand is written into it, and ask whether permits and haul-off are included. Our estimates are free, they name the material, and the written estimate sets the final price. Call (844) 415-6046 for an exact quote.
Fence Installation Near Tustin – Our Service Area
We install fencing across Tustin and the surrounding Orange County cities, including Santa Ana, Orange, Costa Mesa, Fountain Valley, Garden Grove, Midway City, Newport Beach, Westminster, Placentia, Huntington Beach, and Stanton. Most properties in these cities are close enough that we can get an estimate scheduled quickly and dispatch during our normal 7am to 7pm Sunday through Friday window. If you’re in Tustin or a neighboring city and you need a fence looked at, call (844) 415-6046 and we’ll find a time that works.
Serving Tustin, CA – Our Local Coverage Area
We serve Tustin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Tustin

Fence installation is the process of setting posts, hanging panels or fabric, and building gates to create a boundary, privacy screen, or enclosure on your property. It starts with verifying the property line and the permit requirements, then moves to post setting, panel install, and gate fitting. We handle the full scope, including removal of the old fence and cleanup. Call (844) 415-6046 for a free estimate.
Most residential fence installs take one to three days once materials are on site. A straightforward wood or chain link run on flat ground can often be finished in a day, while a long vinyl run with multiple gates or a sloped yard takes longer. Permit turnaround adds time on the front end if your city requires one. We’ll give you a realistic schedule in the written estimate.
A typical vinyl fence installation in Tustin is estimated at $3,500 – $9,000, and a typical aluminum installation is estimated at $4,000 – $10,000. Final pricing depends on footage, gates, material line, and site conditions. The written estimate sets the final price and names the material. Call (844) 415-6046 for an exact quote; estimates are free.
Yes, we install both Jerith and Bufftech, along with ActiveYards and Barrette. Each of those lines carries manufacturer support, which matters if a panel or gate hardware ever fails. We’ll show you the differences between them so you can pick based on how the fence will age on your property, not just the price on the quote. Call (844) 415-6046 to compare options.
Same-day service is available where scheduling allows, and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. For a planned install we’ll get you a scheduled estimate rather than an emergency visit, since fence work needs a proper measure.
Our work is backed by a workmanship warranty, and the fence materials carry manufacturer warranties through the brands we install. Those two pieces cover you separately: the material warranty covers panels and hardware, and our warranty covers how the fence was set and built. We’ll spell out both in writing with your estimate.
Clear the fence line of furniture, planters, hoses, and anything you want to keep before we arrive. If you’ve agreed on removal of the old fence, we’ll handle that, but pull personal items out of the way first. Also check whether your HOA has any rules on fence style or height before we start, so there’s no surprise after the install. Call (844) 415-6046 if you have questions about prep.
Schedule Your Fence Installation Service in Tustin Today
If your fence needs replacing or you’re starting from an empty lot line, get an estimate before you decide on materials. We’ll measure the run, walk you through wood, vinyl, chain link, and aluminum against your actual budget, and put it in writing. It’s free, it’s no-obligation, and the written estimate sets the price. Call (844) 415-6046. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Tustin.












